您好,欢迎来到山东共赢瑞建设工程有限公司网站!

服务热线

13165112299

公司动态 当前位置:首页-新闻资讯-公司动态济南配电箱防护棚

济南配电箱防护棚

发布时间:2024-09-15 来源:https://www.gongyingrui.com/

  一级配电箱防护棚、安全防护配电箱防护棚、配电箱防护栏杆配电箱防护棚说明:1、配电箱防护棚可采用方钢或圆钢制作,稳固安置在混凝土承台上。2、顶部采用双层硬防护。上层有防雨措施,双层硬防护,并设不小于5坡度的排水坡。3、双层硬防护间的防护棚外立面挂蓝底白字的安全宣传标语:加强安全用电,防止触电伤害。防护棚正面挂15号提示牌,侧面挂中建标识。4、配电箱栏杆刷红白(黑黄)相间警戒色。5、配电箱与防护棚之间的距离如图所示。配电箱防护栏杆用途:用于施工现场一、二级配电箱防护。配电箱防护栏杆说明:1、施工现场一、二 级配电箱应按照该标准设置防护棚。2、防护棚采用可装拆式钢板网利用角钢和螺栓进行组装。3、防护棚高2.5m,宽2m,长2m,高2.4米,宽1.5米,长1.5米,高2米,宽1米,长1.5米三种规格4、防护棚地面应做硬化处理,地面应干净整洁,不得堆放妨碍操作、维修的物品。5、防护棚门前1m范围内不得堆放其它材料,确保门开启方便。6、防护棚可由加工单位统一制作安装使用。总之,配电箱护栏网是一种非常实用和安全的配电箱保护设备,其具有稳固性好、耐久性高、易于安装等特点。在资产安全保护方面,配电箱护栏网的作用十分重要。除此之外配电箱防护栏还:锌钢护栏、PVC配电箱防护栏以及玻璃钢配电箱防护栏,多种多样满足不同的选择。微信图片_20240305114240

  First level distribution box protective shed, safety protection distribution box protective shed, distribution box protective railing distribution box protective shed instructions: 1. The distribution box protective shed can be made of square steel or round steel and stably placed on a concrete pedestal. 2. The top adopts double-layer hard protection. The upper layer is equipped with rainproof measures, double-layer hard protection, and a drainage slope of not less than 5 degrees is set up. 3. The exterior of the protective shed in the double-layer hard protection room is hung with a blue background and white text safety propaganda slogan: Strengthen safe use of electricity and prevent electric shock injuries. Hang the No. 15 sign on the front of the protective shed and the Zhongjian sign on the side. 4. The railing of the distribution box shall be painted with red and white (black and yellow) warning colors. 5. The distance between the distribution box and the protective shed is shown in the figure. Application of distribution box protective railing: Used for the protection of first and second level distribution boxes on construction sites. Instructions for protective railings of distribution boxes: 1. The first and second level distribution boxes on the construction site should be equipped with protective sheds according to this standard. 2. The protective shed is assembled with detachable steel mesh using angle steel and bolts. 3. The protective shed has three specifications: 2.5m in height, 2m in width, 2m in length, 2.4m in height, 1.5m in width, 1.5m in length, 2m in height, 1m in width, and 1.5m in length. 4. The ground of the protective shed should be hardened, and the ground should be clean and tidy. Items that hinder operation and maintenance should not be piled up. 5. No other materials shall be stacked within 1 meter in front of the protective shed door to ensure easy opening of the door. 6. The protective shed can be uniformly manufactured, installed and used by the processing unit. In short, the distribution box guardrail is a very practical and safe distribution box protection device, which has the characteristics of good stability, high durability, and easy installation. In terms of asset security protection, the role of the distribution box guardrail is very important. In addition, there are various types of protective barriers for distribution boxes, including zinc steel barriers, PVC distribution box barriers, and fiberglass distribution box barriers, to meet different choices.

  本文由 济南配电箱防护棚 友情奉献.更多有关的知识请点击  http://www.gongyingrui.com   真诚的态度.为您提供为的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

  This article is a friendly contribution from Jinan distribution box protective shed. For more related knowledge, please click http://www.gongyingrui.com Sincere attitude. We provide you with comprehensive services. We will gradually contribute more relevant knowledge to everyone. Please stay tuned